
Fully Automatic PVC ALU Blister Packing Machine is mechanical and pneumatic, all the control systems used in the equipment are the best in the electronic market. This machine uses heat and pressure via a die to form the cavity or pocket from a roll or sheet of plastic. This machine seal products in a cavity, usually with a paper backing or aluminium or film seal. Fully Automatic PVC ALU Blister Packing Machine is very easy to mount and dismount and are achieved using minimum tools and tackles. The blister packs can be used for just about any product, but are common packages for small consumer goods, foods and pharmaceuticals.
Technical specification
Base Film Width Max. | 120 MM |
Base Film Thickness Max. | 0.25 -0.4 MM |
Base Film Material | PVC / PVDC / ACLAR / OPAQUE / TRIPLEX |
Sealing Foil Width Max. | 116 MM |
Sealing Foil Thickness Max | 0,02 - 0.04 MM |
Sealing Foil Material | Aluminum / CR Foil / Laminated Paper |
Pack Length | 110 MM |
Pack Width | 100 MM |
Forming Depth | 16 MM |
Max. Output | upto 600000 Tablet - Capsules per shift(8 Hr.) |
Cutting Speed | upto 70 Strokes per/min. for Tablet-Capsules |
Electrical Input | 3 Phase, 3 KW, 50 Hz, 5 Wire, 2.5 Sq. MM |
Machine Dimensions (LXWXH) | 2000 X 1000 X 1600 MM |
Compressed Air Requirement
CFM | 15 CFM |
Pressure | 6 bar |
Chilled Water Requirement | 100 Liters of chilled Water / Hour at 16° C Temperature |
Additional Safety | Air Dryer, Voltage Stabilizer |
![]() |
HELIOS CONCREW PRIVATE LIMITED
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |